Pipe mould manufacturer from China HENAN WEIN INDUSTRY CO.,LTD.

Pipe mould

Payment Terms:	L/C
Place of Origin:	, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Means of Transport: Ocean

PIPE MOULD
General Technical Information
1) Production range: DN75MM-DN1000MM
2) Material: 21CrMo10

PIPE MOULD

General Technical Information

1)Production range:DN75MM-DN1000MM

2) Material: 21CrMo10

Chemical Composition

C	Si	Mn	P	S	Cr	Mo	Cu
0.16~0.23	0.20~0.40	0.20~0.40	≤0.015	≤0.009	2.20~2.60	0.30~0.50	≤0.20

3)Mechanical Properties

Tensile Strength σb Mpa	Yield Strength σs Mpa	Elongation δ %	Reduction Area ψ %
750~850	≥650	≥16	≥60

4) Ultrasonic Test

The forging of the mould will be ultrasonically tested as per JB/T1581-1996 or equivalent standard, details as follows:

A Without bursts, crack, shrinking hole and other defects.

B The defect with size within ￠2mm can be ignored.

C Individual defect with diameter of φ2~φ4mm is permitted, and the distance of the neighboring defects should be more than the 10 times of the bigger one's. For 100cm2' s area, the quantities of the defects with diameter of φ2~φ4mm should not exceed 3.

D There should not have compact district.

5) Other items

Finish: Ra1.6

Accuracy: 0.1mm

Concentricity: 1.1-1.9mm

Draft Taper: 0-0.9mm

Hardness: HB 230-270

6) P.S.

If the user has different requirements, please give us your requirements in detail along with inquiry